Toshiba GL-1010 Administrator's Manual page 149

5 Select
change.
6 Click
Configuring IPP (Internet Printing Protocol)
IPP Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the IPP Printing area, click the
5 Select
change.
6 Click
Configuring Mac Printing
Macintosh Print Services are enabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Mac Printing area, click the
5 Select
change.
6 Enter a
7 Enter a
8 Click
Configuring Raw TCP Printing
Configuring raw TCP printing enables or disables access to port 9100.
This is the only port that supports the sending of raw, TCP print jobs. LPR
print jobs can be sent to any of the established queues.
To configure raw TCP printing:
1 Log in as an administrator.
2 On the
3 Click the
Administrator's Guide
GL-10x0
or as required for each service you want to
Enable Disable
.
Save
Print Services
or as required for each service you want to
Enable Disable
.
Save
Print Services
or as required for each service you want to
Enable Disable
.
Mac Printer Name
Mac Printer Name for Wireless
.
Save
tab, click the
Administration
Print Services
Setup
link. The Print Services page opens.
drop-down list.
Service
Setup
link. The Print Services page opens.
Service
(if the wireless NIC is installed).
subtab.
Setup
link. The Print Services page opens.
subtab.
subtab.
drop-down list.
127