Toshiba GL-1010 Administrator's Manual page 183

2 Open TopAccess using the IP address of the controller you want to
configure. (Refer to
Note: You can find the IP address through TopAccessDocMon.
3 Login as an Administrator.
4 Click the Administration tab.
5 Click the Setup tab.
6 Click the
7 From the IPX/SPX settings group, select the
8 Select the applicable
automatically sense the
Continue with
Set Print Services
1 On the Setup tab, click the
2 From the
3 From the
Administrator's Guide
GL-10x0
Opening TopAccess
link.
Network
Setup Page
Frame Type
Frame Type
Set Print Services
drop-down list, select
Service
drop-down list, select
Operating Mode
on page 72.)
. Accept the default,
.
on page 161.
link.
Print Services
.
Enable
protocol option.
Enable
, to
Auto
.
Print Server
161