Toshiba GL-1010 Administrator's Manual page 213

Center Margin
Select the booklet mode center margin using the following option.
Option Value
centermargin=<value>
Example: The command to select the center margin value for booklet
printing mode is lp –o centremargin=<value> <filename>.
Outer Margin
Select the booklet mode outer margin using the following option.
Option Value
Outermargin=<value>
Example: The command to select the outer margin value for booklet
printing mode is lp –o outermargin=<value> <filename>.
Inserter
When the inserter option is installed, you can activate it using this
function.
Option Value
insertpaper=LT
insertpaper=A4
insertpaper=LG
insertpaper=LD
GL-10x0 Administrator's Guide
Booklet Mode Center Margin Option
Description
Select the center margin value for booklet printing mode.
This value specifies in pixels the center margin or the gutter. This is
in addition to the center margin already specified by the application.
The valid range for <value> is
Booklet Mode Outer Margin Option
Description
Select the outer margin value for booklet printing mode.
This value specifies, in pixels, the outer margin or the creep per page,
which should take place while printing a booklet. The valid range for
<value> is – . The default is
0 18
Inserter Options
Selects Letter size paper for the inserter.
Selects A4 size paper for the inserter.
Selects Legal size paper for the inserter.
Selects Ledger size paper for the inserter.
– . The default is
0 300
.
0
Description
.
0
191