Kenwood NEXEDGE NX-200 Function Reference page 566

APPENDIX
Key Operations for Each Mode
Manual entry (while entering a
code)
Key
Selects a DTMF code by changing
the DTMF codes one at a time.
Press
Up/ Down
Selects a DTMF code by changing
Hold from one code to another
Down continuously.
Side 1 Press
Transmits the DTMF code after
Side 2 Press
aborting the current mode.
Aborts the current mode after
Press determining the DTMF code.
Menu ([ ])
Hold
Migrates to the list selection mode.
Down
Deletes one digit.
Press
Back
Hold Deletes all digits.
Down
Press Migrates to the list selection mode.
Left
Hold
Down
Press
Right/Home
Hold
Down
[0] to [9] Press Enters a DTMF code.
Migrates to the DTMF code entry
mode. Then, press one of the
following keys:
Press
[0]: Redial
[*]: BOT
[*]
[#]: EOT
Migrates to the DTMF code entry
Hold mode. Then, pressing the [2], [5],
Down [8] or [0] key to enters "A", "B",
"C", or "D" respectively.
Deletes one digit.
Press
[#]
Hold Deletes all digits.
Down
Transmits the DTMF code after
PTT switch Press
aborting the current mode.
FUNC (K)/Ver 4.00
Autodial
Selecting a list
Selects a DTMF code from those
registered in the Autodial List by
changing the DTMF codes one at
a time.
Selects a DTMF code from those
registered in the Autodial List by
changing from one code to
another continuously.
Aborts the current mode.
Migrates to the DTMF Name entry
mode.
Clears one data entry from the
Autodial List.
Clears all data from the Autodial
List.
-
Aborts the current mode.
-
Selects a DTMF code from the list. Enters characters.
Migrates to the DTMF Name entry
mode.
Clears one data entry from the
Autodial List.
Clears all data from the Autodial
List.
Autodial Programming
Editing a DTMF Name (editing a
list)
Selects a character by changing
one character at a time.
Selects a character by changing
from one character to another
continuously.
-
Determines the DTMF Name or
determines the character if a
character is selected.
-
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
- Shifts the cursor to the left.
Shifts the cursor to the left
-
continuously.
Shifts the cursor to the right.
Shifts the cursor to the right
-
continuously.
Determines the DTMF Name or
determines the character if a
character is selected.
-
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
Transmits after aborting the current mode.
CONTENTS
-
-
-
INDEX 532