Kenwood NEXEDGE NX-200 Function Reference page 487

19 SCAN
19.8 Common Functions for Scan
Revert CH/GID
Revert CH/GID is the zone channel (or GID) which is used when the transceiver transmits by a user pressing the PTT
switch during the scan.
Configuration
The transceiver transmits on the last-called zone-channel or GID by a user pressing the PTT switch during the scan.
The transceiver transmits on the zone-channel or GID where the transceiver pauses scanning by a user pressing
Last Called +
the PTT switch during the scan.
Selected
If the zone-channel or GID is changed, the transceiver transmits using the new channel or GID after the zone-
channel or GID is changed until the transceiver receives another call.
The transceiver transmits on the new channel or GID after the zone-channel or GID is changed regardless of the
Selected
scanning status.
The transceiver transmits on the new zone-channel or GID after the zone-channel or GID is changed during the
Selected + scan.
Talkback The transceiver transmits on the zone-channel or GID where the transceiver pauses scanning while the scan
pauses.
Priority 1 The transceiver transmits on a Priority 1 regardless of the scanning status.
The transceiver transmits on a Priority 1 during the scan.
Priority 1 +
The transceiver transmits on the zone-channel or GID where the transceiver pauses scanning while the scan
Talkback
pauses.
Priority 2 The transceiver transmits on a Priority 2 regardless of the scanning status.
The transceiver transmits on a Priority 2 during the scan.
Priority 2 +
The transceiver transmits on the zone-channel or GID where the transceiver pauses scanning while the scan
Talkback
pauses.
Note
• If Revert CH/GID Display is enabled, Revert Channel or GID can appear on the main display during the scan. (Refer to
Display on page 455.)
• If Home Channel/GID is activated, the transceiver transmits on the Home Channel or GID regardless of the configuration of Revert CH/
GID.
• If the Direct CH/GID function is activated (Return is checked), the transceiver transmits on the Direct Zone-CH/GID regardless of the
configuration of Revert CH/GID.
• Talkback is an operation to transmit on the Zone-channel or GID on which the transceiver pauses scanning while the scan pauses.
Configuration using KPG-111D/ DN
Configuring the Revert CH/GID (
FUNC (K)/Ver 4.00
Table 19-3 Revert CH/GID
FPRG 8.13.1 Scan Tab)
See
Description
CONTENTS
Revert CH/GID
INDEX 453