Kenwood NEXEDGE NX-200 Function Reference page 240

9 NXDN TRUNKING SYSTEM
9.5 Making an Individual Call (Transmission Trunked)
 Initiating an Individual Call using Manual Dialing
To initiate an Individual Call using Manual Dialing, Manual Dialing must be enabled using KPG-111D/ DN.
1
Press the Individual
The transceiver enters Individual Call Mode and then the Unit ID
List selection display will appear.
The following operations are identical even if the transceiver
enters Individual Call Mode by a user pressing the Menu key or
using the keypad.
2
Press and hold the
The Unit ID entry display appears.
Pressing the Left key will also show the entry display of the Unit ID.
3
Enter a Unit ID.
Refer to Entering or Deleting a Code on page 48
methods.
 Using the PF keys
The characters can be selected by pressing the Up or Down
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or by
pressing the [ ] or [ ] key (Mobile), and the selected
characters can be determined by pressing the Menu ([
[*] key.
FUNC (K)/Ver 4.00
(NXDN), Individual + Status
Menu ([ ]) or [*] key.
for entry
(NXDN), or Individual + SDM (NXDN)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
]) or
CONTENTS
key.
Mobile
Mobile
INDEX 206