Kenwood NEXEDGE NX-200 Function Reference page 251

9 NXDN TRUNKING SYSTEM
9.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Message Trunked (Enhanced))
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Selcall on PTT (NXDN Trunking System) (
• Configuring the Unit ID corresponding to the Call 1 to Call 6 keys (
Receiving an Individual Call (Message Trunked (Enhanced))
The transceiver can receive an Individual Call if the received Unit ID matches the Unit ID (Own) preconfigured for the
transceiver.
To receive an Individual Call (Message Trunked (Enhanced)), the transceiver must receive from the system a message
requesting an acknowledgment for the Individual Call, and send to the system a message requesting the connection. The
transceivers can initiate the communication after receiving the message for traffic channel assignment from the system.
Operating the Transceiver
The transceiver's behavior varies depending on the configuration for Automatic Response.
 If Automatic Response is disabled:
1
Receive from the system a message requesting reception of an Individual Call.
An Alert Tone (Paging) sounds from the transceiver, and
"INCOMING" or the ID for the transmitting transceiver alternately
appears on the main display every 1 sec.
FUNC (K)/Ver 4.00
See FPRG 8.12 Key Assignment Window)
See FPRG 8.9.6 Selcall on PTT)
FPRG 8.12.8 Call Tab)
See
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
INDEX 217