Kenwood NEXEDGE NX-200 Function Reference page 552

APPENDIX
Available Functions for the PF Keys
Function Name
Transceiver Password
Vibrator (Portable only)
Voice Memo
Volume Down (Mobile only)
Volume Down (Continuous)
(Mobile only)
Volume Up (Mobile only)
Volume Up (Continuous)
(Mobile only)
VOX (NX-200/ NX-210/
NX-300/ NX-410/ NX-411
only)
VOX Function
(Portable only)
Zone Delete/Add
Zone Down
Zone Down (Continuous)
Zone Up
Zone Up (Continuous)
*1
ALL indicates that a function can be used in all systems.
FUNC (K)/Ver 4.00
Enters Transceiver Password Mode. In Transceiver Password Mode, the
transceiver cannot be used until the correct password is entered. (Refer
to 24.1 Password for Transceiver Operation (Transceiver Password) on
page 498.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Toggles the Vibrator between enabled and disabled. (Refer to
Vibrator on page 479.)
Enters Voice Memo Mode. In Voice Memo Mode, the transceiver can
record voice signals input to the microphone and received audio.
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Decreases the volume level in steps of 1. (Refer to
Volume Level on page 19.)
Pressing and holding the Volume Down (Continuous) key will decrease
the volume level in steps of 1 every 100 ms. (Refer to
Volume Level on page 19.)
Increases the volume level in steps of 1. (Refer to
Volume Level on page 19.)
Pressing and holding the Volume Up (Continuous) key will increase the
volume level in steps of 1 every 100 ms. (Refer to
Volume Level on page 19.)
Enters VOX Gain Level Mode. In VOX Gain Level Mode, the VOX
microphone sensitivity can be adjusted. Pressing and holding the VOX
key toggles the VOX function between enabled and disabled. (Refer to
VOX (PORTABLE ONLY) on page
For NX-200/ NX-210/ NX-300/ NX-410/ NX-411, pressing and holding the
VOX key toggles the VOX function between enabled and disabled. For
NX-200S/ NX-300S, pressing and holding the VOX Function key toggles
the VOX function between enabled and disabled. (Refer to
(PORTABLE ONLY) on page 475.)
Toggles the zone between deleted and added.
Decreases the zone number in steps of 1.
Pressing and holding the Zone Down key will decrease the zone number
in steps of 1 every 200 ms.
Increases the zone number in steps of 1.
Pressing and holding the Zone Up key will increase the zone number in
steps of 1 every 200 ms.
Description
3.2 Adjusting the
3.2 Adjusting the
3.2 Adjusting the
3.2 Adjusting the
475.)
21 VOX
Available System
ALL
Using the
ALL
ALL
ALL
ALL
ALL
ALL
Analog Conventional System
21 NXDN Conventional System
Analog Conventional System
NXDN Conventional System
ALL
ALL
ALL
ALL
ALL
CONTENTS INDEX
*1
518