Kenwood NEXEDGE NX-200 Function Reference page 302

10 ANALOG CONVENTIONAL SYSTEM
10.3 Changing the Decode/ Encode Combination of the QT/DQT (OST)
The corresponding OST Name appears for 2 sec.
The previous channel name or number appears on the main
display when the OST Name display disappears.
Note
Pressing and holding the [#] key disables OST while the channel where OST is enabled is selected.
Configuration using KPG-111D/ DN
Assigning functions to the Keypad Operation on the transceiver (
OST Status Memory
OST Status Memory is the function that is used to retain the OST code configured for each channel even if the transceiver
is turned OFF or the channel is changed.
If this function is enabled, the OST code configured for each channel can be retained even if the channel is changed or the
transceiver is turned OFF.
If this function is disabled, the OST code configured for each channel cannot be retained even if the channel is changed or
the transceiver is turned OFF.
Configuration using KPG-111D/ DN
Configuring the OST Status Memory to be enabled or disabled (
Disabling the QT/DQT Decode/ Encode (Tone Off)
Tone Off allows a user to select "TONE OFF" on a main display by using the keys on the transceiver.
If this function is enabled, "TONE OFF" can be selected from the OST List.
If "TONE OFF" is selected, QT/DQT Encode and QT/DQT Decode can be disabled.
Configuration using KPG-111D/ DN
Configuring the Tone Off to be enabled or disabled (
FUNC (K)/Ver 4.00
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
See FPRG 8.12.2 General Tab)
See FPRG 8.11.1 Conventional Tab)
See FPRG 8.11.1 Conventional Tab)
Mobile
CONTENTS INDEX 268