Receiving A Ptt Id - Kenwood NEXEDGE NX-200 Function Reference

13 MDC-1200
13.1 Transmitting/ Receiving a PTT ID
Preventing the PTT ID from Sending Repeatedly (PTT ID Pause)
PTT ID Pause is the function to keep the PTT ID from being sent when the transceiver alternates between transmit and
receive in a certain period of time. This function can be used to prevent sending the PTT ID repeatedly to the receiving
party.
Refer to Preventing the PTT ID from Sending Repeatedly (PTT ID Pause) on page 307
Data Transmit Modulation Delay Time
If Data Transmit Modulation Delay Time is configured, the transceiver sends the ID (Own) in the MDC-1200 format when
the amount of time configured for Data Transmit Modulation Delay Time elapses after the transceiver starts transmitting.
Restricting the Transmission of the PTT ID in Talk Around (Restricted ID in Talk Around)
Restricted ID in Talk Around is a function to disable the PTT ID transmission while Talk Around is enabled even if the PTT
switch is pressed or released.
This function is available when PTT ID is not required such as when directly communicating with other transceivers.
Note
This function can be only used in an Analog Conventional system.
Configuration using KPG-111D/ DN
• Configuring the PTT ID (Analog) (Conventional) (
• Configuring the PTT ID (Analog) (LTR Trunking System) (
• Configuring the PTT ID Sidetone (MDC-1200) (
• Configuring the PTT ID Pause (Analog) (Conventional) (
• Configuring the PTT ID Pause (Analog) (LTR Trunking System) (
• Configuring the Data Transmit Modulation Delay Time (
• Configuring the Restricted ID in Talk Around to be enabled or disabled (

Receiving a PTT ID

When the transceiver receives a PTT ID, the received ID, ID Name, or ID List number appears on the main display.
Displaying the ID of the Communicating Caller on the LCD (Caller ID Display)
If Caller ID Display is enabled, the received ID, ID Name, or ID List number appears on the main display when the
transceiver receives a PTT ID.
If no received ID is configured for ID List in MDC-1200, the ID will appear.
If the received ID is configured for ID List in MDC-1200, the corresponding ID Name will appear. However, if the received
ID is configured for ID List in MDC-1200 but no ID Name is configured, ID List number will appear.
FUNC (K)/Ver 4.00
See FPRG 8.3.3 Page 1 Tab)
See FPRG 8.7.8 PTT ID (Analog))
See FPRG 8.18.2 General Tab)
See FPRG 8.3.4 Page 2 Tab)
See FPRG 8.7.16 PTT ID (Analog))
See FPRG 8.18.3 Parameter Tab)
See
for details.
FPRG 8.11.1 Conventional Tab)
CONTENTS INDEX 353