Kenwood NEXEDGE NX-200 Function Reference page 187

8 NXDN CONVENTIONAL SYSTEM
8.9 Sending and Receiving a Status Message (Status Call)
 Sending a Status Message using Manual Dialing
To send a Status Message using Manual Dialing, Manual Dialing must be enabled using KPG-111D/ DN.
1
Select one of the following operations to place the transceiver in Status Mode.
• Press the Status (FleetSync/NXDN) key.
The transceiver enters Status Mode. In this case, a Status
Message is addressed to a Base ID.
• Press the Individual + Status (NXDN) key.
Pressing the Menu ([
target transceiver's Unit ID places the transceiver in Status
Mode.
• Press the Group + Status (NXDN) key. (NXDN Conventional
System)
Pressing the Menu ([
target transceiver's Group ID places the transceiver in Status
Mode.
• Press the Group + Status (NXDN) key after selecting the
target transceiver's Group ID. (NXDN Trunking System)
The transceiver enters Status Mode.
Or, the transceiver enters Status Mode by a user pressing the
Menu key or using a keypad. In this case, the following
operations are identical.
2
Press and hold the
The status entry display appears.
Pressing the Left key will also show the status entry display.
3
Enter a status.
Refer to Entering or Deleting a Code on page 48
methods.
• Using the PF keys
The characters can be selected by pressing the Up or Down
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or by
pressing the [ ] or [ ] key (Mobile), and the selected
characters can be determined by pressing the Menu ([
[*] key.
• Using the keypad
A code can be entered by pressing the [0] to [9] keys.
FUNC (K)/Ver 4.00
]) or [*] key after a user selects the
]) or [*] key after a user selects the
Menu ([ ]) or [*] key.
for entry
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
]) or
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
Mobile
Mobile
INDEX 153