Kenwood NEXEDGE NX-200 Function Reference page 461

18 DATA COMMUNICATION FUNCTIONS
18.4 Prioritizing Data Communications Using an External Device (Data Override)
18.4 Prioritizing Data Communications Using an External Device
(Data Override)
Data Override is the function that allows prioritization of data communication using an external device even if the
communication is made by a user operating the transceiver.
The transceiver behaves as follows according to the configuration for Data Override.
Configuration
Data communications using an external device has a high priority level.
Data Override is activated when the following AUX Input ports are activated and when the transceiver receives a PC
command from the serial port. (Mobile only)
• External PTT (Data)
• Data PTT
• DTC
• CH/GID Select A to CH/GID Select D
Enabled
When Data Override is activated, the transceiver automatically exits the following statuses:
• Auto Telephone Search Mode
• Function Mode
• Public Address Mode (Mobile only)
• The state when the transceiver temporarily migrates to a channel or GID by pressing one of the Direct CH/
GID 1 to Direct CH/GID 5, Home CH/GID or CH/GID Recall key
The transceiver key control has the priority. The transceiver suspends the transmission even if the transceiver
Disabled
receives the above data transmission request from an external device.
Note
While the transceiver is under the following conditions, Data Override is not activated:
• While the transceiver is transmitting (including while a link is established in an LTR Trunking system)
• While the Public Address function is used (Mobile only)
• While the transceiver is initiating a System Search
• While the transceiver is in Emergency Mode
• While the transceiver is in Transceiver Password Mode
• While the transceiver is recording a message in Auto Reply Message
• While the transceiver is in the Stun state
Configuration using KPG-111D/ DN
• Configuring the Data Override to be enabled or disabled (
• Configuring the Data Override (Serial Input) (
FUNC (K)/Ver 4.00
Table 18-1 Data Override
Description
See FPRG 8.30.2 AUX Tab)
See FPRG 8.10.6 Common Page 4 Tab)
CONTENTS INDEX 427