Kenwood NEXEDGE NX-200 Function Reference page 322

Hide thumbs Also See for NEXEDGE NX-200:
Table of Contents

Advertisement

11 LTR TRUNKING SYSTEM
11.3 Priority Calling (Fix ID)
Unmuting the Speaker by Linking with the Microphone (Off-hook Decode)
(Mobile Only)
Off-hook Decode is the function linked with a microphone on- or off-hook state to unmute the speaker upon match of an
LTR ID.
The transceiver behaves as follows according to the configuration for Off-hook Decode.
Configuration
The transceiver opens the squelch according to the configuration for Audio Control while the microphone is in
Enabled
either the on-hook state or off-hook state.
The transceiver unmutes the speaker when the transceiver detects a frame upon matching the LTR ID if the
microphone is in the off-hook state.
Disabled
The transceiver opens squelch according to the configuration for Audio Control if the microphone is in the on-
hook state.
Note
• Stun can be activated regardless of the status of Off-hook Decode and the microphone on- or off-hook state. (Refer to
Speaker by Linking with the Microphone (Off-hook Decode) (Mobile Only) on page
• The matching state of Optional Signaling will be reset by hooking the microphone on a hanger (On-hook state) after receiving a call by
Optional Signaling.
Configuration using KPG-111D/ DN
Configuring the Off-hook Decode to be enabled or disabled (
11.3
Priority Calling (Fix ID)
Fix ID is an ID having a higher priority level than that of Group ID.
Fix ID can be used to preferentially alternate to the Fix ID while the transceiver is receiving a call with another ID.
Following is the priority order of Fix IDs.
1st Fix ID  2nd Fix ID  Displayed Group ID (Revert ID)  Selectable ID (Scan Add = Yes)  Decode ID
Call Indicator and Optional Signaling can be used when the transceiver receives a Fix ID. (Refer to
82,
11.2 Using the Optional Signaling (LTR) on page
However, the transceiver cannot receive a Fix ID under the following conditions:
If the transceiver receives a call from a Fix ID while the transceiver is communicating with a telephone.
If the transceiver is receiving a call with Trunkout via a repeater other than the Home Repeater.
If the transceiver receives a call from a Fix ID in the data group.
Configuration using KPG-111D/ DN
Configuring the Fix ID (
FUNC (K)/Ver 4.00
Table 11-3 Off-hook Decode
285.)
FPRG 8.6.17 ID (Fix ID))
See
Description
264.)
See
FPRG 8.10.1 Common Page 1 Tab)
CONTENTS
Unmuting the
Call Indicator on page
INDEX
288

Advertisement

Table of Contents
loading

Table of Contents