Kenwood NEXEDGE NX-200 Function Reference page 276

9 NXDN TRUNKING SYSTEM
9.17 Adding a Group ID by Remote Control (Remote Group Add)
If the change of the Group ID is not allowed by the information in
the received message, "GRP ADD-F" appears on the transceiver
main display. In this case, the transceiver can transmit and
receive only with the Regroup ID. Another zone or GID cannot be
selected by a user operating transceiver keys.
 Receiving the message requesting to reset the change of the remote group
1
The transceiver starts receiving the message requesting to reset the change of the remote group.
"RECEIVE DATA" appears on the transceiver main display.
2
Receive the message requesting to reset the change of the remote group.
"COMPLETE" appears on the main display.
The Regroup ID added to the zone in the NXDN Trunking system
where the transceiver receives the message is cleared, and then
the lowest GID No. will be selected.
Note
• Multiple Regroup IDs cannot be added. Therefore, the Regroup ID will be overwritten if the transceiver to which the Regroup ID has
already been added receives the message requesting to change the remote group.
• The Regroup ID will be cleared if the configuration data is written on the transceiver by using KPG-111D/ DN.
FUNC (K)/Ver 4.00
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 242