Kenwood NEXEDGE NX-200 Function Reference page 359

12 FleetSync
12.6 Sending and Receiving a Status Message (Status Call)
3
Press the Side 2 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), the
switch.
The transceiver sends the Status Message.
 If the Status Message is successfully sent to the target
party:
"COMPLETE" appears on the main display.
 If the Status Message cannot be sent to the target party:
"NO REPLY" appears on the main display.
 If the target party is busy and the Status Message cannot
be sent:
"BUSY" appears on the main display.
FUNC (K)/Ver 4.00
Square key (Mobile), or the
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX
PTT
325