Settings - Hitachi Relion 650 Series Technical Manual

1MRK 511 557-UEN Rev. A
12.16.5

Settings

Table 241: CBCOMP Non group settings (basic)
Name Values (Range)
Operation
IdleTimeErrInpOpt
TempErrInpOpt
PresErrInpOpt
Spr1ErrInpOpt
Spr2ErrInpOpt
Spare1ErrInpOpt
Spare2ErrInpOpt
Table 242: CBCOMP Group settings (basic)
Name Values (Range)
IdleTimeInpSel
IdleCompModeSel
CntrlVoltCompModeSel
TempCompModeSel
Table continues on next page
Technical Manual
Unit
Off -
On
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
All Healthy -
Max. one faulty
Min. one healthy
Unit
Electrical -
Mechanical
None -
O&C, 3 sensors
O&C, 1 sensor
C only, 3 sensors
C only, 1 sensor
O only, 3 sensors
O only, 1 sensor
None -
O&C, 1 sensor
C only, 1 sensor
O only, 1 sensor
None -
O&C, 3 sensors
O&C, 1 sensor
C only, 3 sensors
C only, 1 sensor
O only, 3 sensors
O only, 1 sensor
© 2021 Hitachi Energy. All rights reserved.
Step Default
- On
- All Healthy
- All Healthy
- All Healthy
- All Healthy
- All Healthy
- All Healthy
- All Healthy
Step Default
- Mechanical
- None
- None
- None
Description
Operation Off / On
Idle time compensation requirement on
input health status
Temperature compensation requirement
on input health status
Drive pressure compensation
requirement on input health status
Spring charge (analog) compensation
requirement on input health status
Spring charge (binary) compensation
requirement on input health status
Spare1 compensation requirement on
input health status
Spare2 compensation requirement on
input health status
Description
Idle time input selection - primary
current/voltage (electrical) or CB
auxiliary contacts (mechanical)
Idle time compensation input mode
selection
Control voltage compensation input
mode
Temperature compensation input mode
Section 12
Monitoring
PID-7614-SETTINGS v1
241