Mitsubishi Electric MELSEC iQ-R Series User Manual page 549

[Cd.183] Execution prohibition flag
If the execution prohibition flag is ON when the positioning start signal turns ON, positioning control does not start until the
execution prohibition flag turns OFF. Used with the "Pre-reading start function". (Page 270 Pre-reading start function)
Fetch cycle: At start
■Setting value
• Set with a decimal.
Setting value
1
Other than 1
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 402 Axis control data
■Default value
Set to "0".
Downloaded from ManualsNet.com search engine
Details
During execution prohibition
Not during execution prohibition
12 DATA USED FOR POSITIONING CONTROL
12
547
12.8 Control Data