Chapter 10 Parameter Setting; Parameter Setting Procedure - Mitsubishi Electric MELSEC iQ-R Series User Manual

10
PARAMETER SETTING
This chapter describes the parameter setting of the Motion module. By setting parameters, the parameter setting by program
is not needed.
The parameter setting has two types including the module parameter setting and Simple Motion module setting.
10.1
1.
Add the Motion module in the engineering tool.
Navigation window  "Parameter"  "Module Information"  Right-click  [Add New Module]
2.
The parameter setting has two types including the module parameter setting and Simple Motion module setting. Select
either of them from the tree on the following window.
Navigation window  "Parameter"  "Module Information"  Target module
3.
Write the settings to the CPU module with the engineering tool.
[Online]  [Write to PLC]
4.
The settings are reflected by resetting the CPU module or powering off and on the system.
10 PARAMETER SETTING
360

10.1 Parameter Setting Procedure

Downloaded from ManualsNet.com
Parameter Setting Procedure
search engine