Block Start - Mitsubishi Electric MELSEC iQ-R Series User Manual

Block start

In a "block start (normal start)", the positioning data groups of a block are continuously executed in a set PLC starting from the
positioning data set in "[Da.12] Start data No." by one start.
The control examples are shown when the "block start data" and "positioning data" are set as shown in the setting examples.
Setting examples
■Block start data setting example
Axis 1 block start data
1st point
2nd point
3rd point
4th point
5th point

■Positioning data setting example
Axis 1 positioning data
No.
1
2
3
4
5
6

10

15

*1 "1 block" is defined as all the data continuing from the positioning data in which "continuous positioning control" or "continuous path
control" is set in "[Da.1] Operation pattern" to the positioning data in which "independent positioning control (Positioning complete)" is
set.
4 HIGH-LEVEL POSITIONING CONTROL
142
4.3 Setting the Block Start Data
Downloaded from ManualsNet.com
[Da.11] Shape
1: Continue
1: Continue
1: Continue
1: Continue
0: End
[Da.1] Operation pattern
00: Positioning complete
11: Continuous path control
01: Continuous positioning
control
00: Positioning complete
11: Continuous path control
00: Positioning complete
00: Positioning complete
00: Positioning complete
search engine
[Da.12] Start data No. [Da.13] Special start
instruction
1 0: Block start
2 0: Block start
5 0: Block start
10 0: Block start
15 0: Block start
*1
1 block
1 block
[Da.14] Parameter




