Got Self Check (Debug); Device Monitor Function; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

16. GOT SELF CHECK (DEBUG)

The debug includes functions to check the PLC system status and to improve troubleshooting efficiency.
The following is available as the debug.
Item
Device monitor
FX3U-ENET-ADP communication
setting function

16.1 Device Monitor Function

For a controller connected to the GOT, forcibly turning on or off devices of the controller and changing the set value or
present value are available.
16.1.1

System configuration

This section describes the controller names and connection types between the GOT and a controller that are applicable to
the device monitor function.
For details of communication units and cables for each connection type, refer to the following manual.
➠
■1. Target controller
Controller
RCPU
FX5CPU
QCPU (Q mode), LCPU
QnACPU
ACPU, QCPU (A mode)
FXCPU
Inverter
Microcomputer
MODBUS
■2. Required system application
Basic system application
Communication driver
For a controller connected to the GOT, forcibly turning on or off devices of the
controller and changing the set value or present value are available.
The communication set value of the FX3U-ENET-ADP stored in the CPU can be
changed.
GOT2000 Series Connection Manual for GT Works3 Version1
Ethernet connection, Computer link connection
Ethernet connection, Direct CPU connection
Ethernet connection, Direct CPU connection, Computer link connection, CC-Link(G4) connection
Direct CPU connection, Computer link connection
Direct CPU connection
Ethernet connection, Direct CPU connection
Inverter connection
Microcomputer connection (Ethernet), Microcomputer connection (Serial)
MODBUS(R)/TCP connection, MODBUS(R)/RTU connection
System application
Ethernet(MELSEC)
Ethernet(FX)
MODBUS/TCP
SERIAL(MELSEC)
MELSEC-A
MELSEC-FX
CC-Link(G4)
FREQROL 500/700/800, Sensorless servo
Microcomputer connection
MODBUS/RTU
Description
Connection type
-
-
-
-
16.1 Device Monitor Function
Reference
➠
16 - 1
➠
16 - 41
Version
16 - 1
16