Resident System Program - NEC Electra Elite 48/192 Features And Specifications Manual

Resident System Program

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
When power is supplied to the system, the hardware configuration is scanned
and Resident System Program default values are assigned. This enables
immediate operation, even before the system is programmed to accommodate
the individual site requirements.
Terminal Type:
Not applicable
Required Components:
None
None
General:
Default assignments for Multiline Terminals are as follows:
¥
LK 01~ LK 08 corresponds to CO 01~ CO 08.
Default assignments for Attendant Add-On Consoles are as follows:
¥
• DSS1 Port 1
• DSS 2 Port 2
• DSS 3 Port 1
• DSS 4 Port 2
R-5
R- 11