Live Monitoring - NEC Electra Elite 48/192 Features And Specifications Manual

Live Monitoring

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
An Electra Elite Multiline Terminal user can listen to voice mail messages as
the message is being recorded by the EliteMail VMS/FMS. Live Monitoring is
password protected and can be used in automatic or manual mode. When
Live Monitoring is in use, the audio is played from the Multiline Terminal
Speaker. The terminal user can pick up the handset and speak to the caller
anytime during the recording.
System Software S3000 or higher and EliteMail VMS version Q30631 or
higher or an EliteMail FMS version QOS631 or higher are required.
Terminal Type:
All Multiline Terminals
Required Components:
VMS(2)/(4)/(8)-U10 ETU
FMS(2)/(4)/(8)-U10 ETU
CTI/VP(4)/(8)/(12)/(16)-U10 ETU
FMS/VMS
To enable Live Monitoring:
1. Press the feature access key assigned as Live Monitoring.
2. Dial the password (same as Station Outgoing Lockout password);
K K K K K K K K K K
default is
3. Live Monitoring key flashes green while this feature is being set.
To cancel the Live Monitoring Feature when not in use:
Press the Live Monitoring Feature Access key.
L-4
.
L - 7