NEC Electra Elite 48/192 Features And Specifications Manual page 150

Electra Elite
SERVICE
CONDITIONS
Features and Specifications Manual
To cancel at a destination station (Attendant Positions only):
1. Lift the handset or press
2. Dial Access Code
3. Dial the station number where forwarding is to be canceled.
P
4. Wait for the confirmation tone, and restore the handset or press
.
To cancel Call Forward - All Call, Busy/No Answer, and Do Not
Disturb system-wide (Attendant Positions only):
T
1. Press .
2. Dial Access Code
T
3. Press .
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK2 to Allow (default: LED On) or Deny (LED
Off) Call Forward - All Call set/reset.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK3 to Allow (LED On) or Deny (default: LED
Off) System-wide reset of Call Forward - All Call.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK1 to allow (default: LED On) Call Forward - All
Call/DND.
This feature can be assigned on Feature Access or One-Touch keys
¥
using Memory Blocks 2-05 (Line Key Selection) and 2-06 (Line Key
Selection for Tenant Mode) or 4-12 (Line Key Selection for
Telephone Mode).
Restrictions:
At default, system-wide cancel of Call Forward - All Call from
¥
Attendant Positions is denied.
Ring Transfer, Camp-On, and Tone Override cannot be set to a
¥
station that has Call Forward - All Call set.
DND and Call Forward - All Call cannot be set at a station at the
¥
same time.
P
.
D H
(set as default).
F H
.
Issue 6
C - 31