NEC Electra Elite 48/192 Features And Specifications Manual page 27

Issue 6
SERVICE
CONDITIONS
A - 6
To program Account Code - Forced/Verified from Attendant
Position:
1. Lift the handset, and wait for internal dial tone.
2. Dial the Forced Account Access Code (not assigned at default),
and wait for a second dial tone.
3. Dial the Forced Account Number (
4. Dial the Forced Account Code (default: 10 digits). Wait for
Confirmation tone.
N
5. Press
is displayed. (Repeat steps 4 ~ 5 until all desired Account Codes
are entered.)
P
6. Press
To use this feature with Scrolling Directories:
V
1. Press the
station speed dialing.
V
2. Press the
listed in the directory.
Press a dial pad key (to select the first letter of the name or
number of the desired speed dial buffer) and dial
3. To dial the number press
4. Enter the Account code.
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK8 to Allow (default LED On) or Deny (LED Off)
Attendant Positions to program Forced Account Codes.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 5 LK1 to Allow (LED On) or Deny (default: LED Off)
Account Code Forced/Verified.
K K A
to enter the information. The next Account Number
to stop entering Account Codes.
( SYS. or STA. softkey) to designate system or
( UP or DOWN softkey) to view the names/numbers
- OR -
P
or lift the handset.
Account Code - Forced/Verified/Unverified
Electra Elite
E K K
~ ) .
J
.