Automated Attendant - NEC Electra Elite 48/192 Features And Specifications Manual

Automated Attendant

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Automated Attendant answers incoming CO/PBX calls and sends a
greeting message to calling parties. When the caller enters a station number
or a 1- or 2-digit number from the dial pad, as instructed in the greeting
message, the Automated Attendant transfers the call to a designated station
or Station Hunt group. The Automated Attendant can be set to provide eight
automated message levels.
Incoming DID calls can be answered by the Automated Attendant (System
Software S5000 or higher is required).
Terminal Type:
Not applicable
Required Components:
VRS(4)-U10 ETU
To record an Automated Attendant Message:
1. Go off-hook.
2. Dial the VRS Voice Message Record/Verify/Erase Access Code
E K
(e.g.,
3. Dial operation:
A
Recording
B
Confirmation
C
Erasing
4. Dial operation:
A
Automated Attendant
B
Voice Prompt Message
C
Delay Announcement
5. Enter Automated Attendant Message (
) .
A
A-16
H
~
) .
A - 45