Off-Hook Ringing - NEC Electra Elite 48/192 Features And Specifications Manual

Off-Hook Ringing

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Off-Hook Ringing alerts a Multiline Terminal user that an incoming outside call
is ringing to that station during another call. Off-Hook Ringing is provided
through the built-in speaker of the Multiline Terminal and at a lower volume
than On-Hook Ringing.
Terminal Type:
All Multiline Terminals
Required Components:
None
To set off-hook ringing volume:
1. Go off-hook with the handset.
2. Dial the Access Code (default:
A
3. Dial from the dial pad.
M
4. Press press
off-hook ringing volume.
5. Go on-hook.
Data Assignment:
Use Memory Block 4-51 (Off-Hook Ringing Selection) to assign Off-Hook
¥
Ringing per station (default: YS).
Use Memory Block 1-1-46 [Access Code (1-Digit) Assignment] and
¥
1-1-47 [Access Code (2-Digit) Assignment] to set the access code
(default: 60) for Volume/LCD Control.
Restrictions:
Off-Hook Ringing is not provided when the Multiline Terminal speaker is
¥
activated or when the terminal is in Do Not Disturb (DND) mode.
F K
( = increase) or ( = decrease) to increase/decrease
v
^
O-1
) .
O - 1