NEC Electra Elite 48/192 Features And Specifications Manual page 432

Electra Elite
SERVICE
CONDITIONS
Features and Specifications Manual
To start a conference call using outside DIT:
1. Call a trunk that is set as DIT to Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
3. Start the conference.
To start a conference call on an incoming CO call using an
Automated Attendant:
1. Call a trunk that is set as an Automated Attendant.
2. Select the option for an extension connected to the Conference
Bridge.
3. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
4. Start the conference.
To start a conference call from an incoming CO call using an
Attendant:
1. Call the Attendant, and ask to be transferred to an extension
connected to the Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
3. Start the conference.
Data Assignment:
Use Memory Block 7-1 (Card interface Slot Assignment) to assign
¥
the CNF(8)-U10 ETU as an SLI ETU.
Use Memory Block 4-35 (Voice Mail/SLT Selection) to assign (YS)
¥
the ports connected to the CNF(8)-U10 ETU as analog voice mail
ports to insure proper disconnect signals.
unassigned.
L
.
L
.
L
.
Issue 6
Default is NO,
M - 9