NEC Electra Elite 48/192 Features And Specifications Manual page 301

Issue 6
SOFTWARE
SUPPORT
SYSTEM
AVAILABILITY
REQUIRED
COMPONENTS
D - 92
TCP/IP protocol for support of IP traffic and management
¥
¥ RVPoIP uses UDP/IP protocol for voice transmission
¥ Serial RVP uses HDLC encapsulation for voice transmission
Management and utilities: Telnet, inband RVP, RS-232 console
¥
interface (Gateway and Branch), SNMP, and HTML
¥ Software upgradable, using FTP, between the Gateway and the
branch, RS-232 serial port to PC, or inband connection
Terminal Type:
DTP/DTU Multiline Terminals
DTP-32DE-1 for home environment
Components include the following:
¥ Electra Elite KTS with 1 ESI port for each Branch port and IP Adapter
¥ 1 Gateway unit
1 Branch unit and/or IP Adapters with total ports not exceeding the
¥
number of ports supported by the Gateway unit
¥ 1 Power Cord
¥ 1 RS-530 cable
¥ 2 RJ-21 50 pin cables to connect Gateway to DTS and Branch to
punch block – connectors required include a female connector to
term
attach to D IP, and a male connector to attach to the KTS
Punch blocks that can crossconnect the D
¥
term
and D telephones to the branch locations
¥ Installation hardware for Gateway and Branch units
1 System Administrator's Guide
¥
1 Quick Installation Guide
¥
¥ 1 Application Guide
¥ PC for configuration
T1, Fractional T1, ISDN, Frame Relay or ATM circuit that can connect
¥
the Branch unit to the Gateway location
Electra Elite
term
IP Gateway to the KTS
term
D ® IP Gateway System