Hot Line - NEC Electra Elite 48/192 Features And Specifications Manual

Hot Line

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Hot Line enables a station user to go off-hook to automatically dial an outside
number or another station. This feature is provided for Multiline Terminals and
Single Line Telephones.
Terminal Type:
All Multiline Terminals
Required Components:
None
To execute at any station programmed for Hot Line:
1. Lift the handset to go off-hook, or press
2. The station or outside number is called.
Data Assignment:
Use Memory Block 4-23 (Prime Line/Hot Line Assignment) to enable
¥
access to the Hot Line feature when going off-hook. Default is not
specified.
General:
Only hardware abilities limit the number of Hot Lines that can be
¥
supported in the system.
Up to 10 digits can be stored for dialing, including Trunk Access Codes.
¥
Multiline Terminal users assigned Hot Line can press the Feature key
¥
and Access Code 6
tone.
With Hot Line assigned, internal dial tone can be received by pressing
¥
the Hold, Conference, or Transfer key.
or press Feature + Speaker to receive internal dial
D
H-6
P
.
H - 13