NEC Electra Elite 48/192 Features And Specifications Manual page 363

Issue 6
SERVICE
CONDITIONS
G - 2
To toggle the relay from on to off (or off to on):
T
1. Press
2. Dial the relay number
T
3. Press .
Data Assignment:
¥ Use Memory Block 1-6-05 (Attendant Add-On Console Key
Selection) to assign GP Relay functions to Attendant Add-On
Console keys. Default is TEL01.
¥ Use Memory Block 1-7-07 (External Ring Relay Pattern Selection) to
select a distinctive ringing pattern (default: Pattern 3) for relays.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK 7 to allow (default: LED On) or deny (LED
Off) the General Purpose relay feature.
¥ Use Memory Block 1-8-37 (General Purpose Relay Assignment) to
specify whether (YS or default: NO) the relays on the ECR-U10 ETU
are to be used.
¥ Use Memory Block 2-08 (ECR Relay to Tenant Assignment) to
specify Tenant Assignment for External Tone Ring/Night Chime
function. Default is not assigned.
¥ Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
the ECR-U10 ETU.
General:
¥ The General Purpose relays are rated for 24 Vdc at 500 mA.
The red LED indication is provided to indicate on or off when the GPR
¥
Access Codes are assigned to a Feature Access key.
¥ The LED indication is provided to all Feature Access keys and
Attendant Add-on Consoles that are assigned to GP Relay 0 or GP
Relay 1 functions.
K
and dial .
K A
or ( for GPR0 or GPR1).
Electra Elite
General Purpose Relays