Pooled Line (Outgoing - NEC Electra Elite 48/192 Features And Specifications Manual

Pooled Line (Outgoing)

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Pooled Line (Outgoing) allows Multiline Terminal users to seize an outside line
on one Pooled line key. One Pooled line key can accommodate a Trunk group
or Route Advance Block.
Terminal Type:
All Multiline Terminals
Required Components:
None
To originate an outside call:
1. Press the Pooled line key, and wait for outside line dial tone.
2. Dial the desired telephone number.
Data Assignment:
Use Memory Block 2-05 (Line Key Selection) to select the TEL
¥
(Telephone Mode) or TNAT (Tenant Mode) line key assignment for each
Tenant. Default is TEL.
Use Memory Block 2-06 (Line Key Selection for Tenant Mode) to assign
¥
a pooled line to a CO/PBX line key on each telephone in a Tenant
assigned to Tenant Mode.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
¥
assign a pooled line to a CO/PBX line key on each telephone in a Tenant
assigned to Telephone Mode.
Use Memory Block 3-03 (Trunk-to-Trunk Group Assignment) to assign a
¥
Trunk Group Number to each CO/PBX line.
Restrictions:
A Pooled Line (Outgoing) cannot receive incoming calls.
¥
P-3
P - 7