NEC Electra Elite 48/192 Features And Specifications Manual page 57

Issue 6
SERVICE
CONDITIONS
A - 36
To answer a Camp-On Call from a Multiline Terminal:
1. The user engaged in a call receives a camp-on tone. The
flashes red, the Large LED flashes green, and CO/PBX line
flashes green, when assigned.
O
2. Press
previous call is put on hold.
To answer a Camp-On Call from a Single Line Telephone:
1. The user engaged in a call receives a camp-on tone.
2. Hang up or put the call on System Call Park.
3. Go off-hook, and talk with the CO/PBX incoming caller.
Data Assignment:
Use Memory Block 1-1-11 (System Transfer/Camp-On Selection) to
¥
select whether (default: YS) or not (NO) the station user can press
the transfer key to perform a Station Camp-On.
Use Memory Block 1-1-64 (Attendant Add-On Console Transfer/
¥
Camp-On Recall Time Selection) to set the Attendant Camp-On
Recall Time for 0.5 (default), 1.5, 2, 3, 5, 8, or 10 minutes.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 3 LK3 to Allow (default: LED On) or Deny (LED
Off) receiving a Camp-On tone.
Restrictions:
Camp-On is not allowed to stations that have received Tone
¥
Override.
General:
The camp-on tone is heard over the handset or from the speaker
¥
when the Multiline Terminal is in handsfree mode.
Any number of outside calls can be camped on to a station. When
¥
the station goes idle, the Camp-On calls are answered in order from
the lowest numbered lines to the highest numbered lines.
and talk with the CO/PBX incoming caller. The
Electra Elite
O
Attendant Camp-On