NEC Electra Elite 48/192 Features And Specifications Manual page 179

Issue 6
SERVICE
CONDITIONS
C - 60
Data Assignment:
Use Memory Blocks 1-1-46 and 1-1-47 [Access Code (1- or 2-Digit)
¥
Assignment] to assign the following other Call Pickups that do not
have an Access Code at default:
• Call Pickup CO/PBX by Tenant (1-digit)
• Call Pickup CO/PBX/Centrex by Tenant (2-digit)
• Call Pickup CO/PBX for other Tenants
• Internal/CO/PBX Transfer Call Pickup in Same Tenant
• Call Pickup CO/PBX in Same Tenant
• Call Pickup (Tie only) in Same Tenant
• Call Pickup (PBX only) in Same Tenant
• Call Pickup (CO only) in Same Tenant
Restrictions:
Voice announced internal calls cannot be picked up in the same
¥
Tenant Group.
General:
Call Pickup Groups are created by assigning Tenant Groups. A
¥
maximum of 48 Call Pickup Groups can be assigned.
All Call Pickup Access Codes are valid for both Day Mode and Night
¥
Mode except the Night Call Pickup Access Code. The Night Call
Pickup Access Code is valid when a tenant is in Night Mode and the
Night Chime feature is programmed.
An incoming Tie/DID call is first treated as an internal call. After
¥
timeout (default: No Timeout), the incoming call is treated as an
incoming CO/PBX outside call.
When incoming
¥
simultaneously, the internal call with the lowest station number is
answered first.
To Call Pickup a Secondary Incoming Extension, a user must dial the
¥
applicable Access Code to pick up the original call.
calls terminate on
Electra Elite
two or more stations
Call Pickup Group