NEC Electra Elite 48/192 Features And Specifications Manual page 623

Issue 6
SERVICE
CONDITIONS
V - 2
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
¥
Assignment] Function numbers 020~25 to assign the Access Code
for Voice Mail Message set/cancel.
Use Memory Block 4-35 (Voice Mail/SLT Selection) to specify
¥
whether (YS) or not (default: NO) Voice Mail is interfaced with SLT
ports.
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
¥
the required SLI(4)/(8)-U10 ETU.
A maximum of four SLI(4)-U10 ETUs or two SLI(8)-U10 ETUs can be
¥
installed to support 16 analog Voice Mail ports.
Restrictions:
SLI(4)/(8)-U10 ETU ports assigned as voice mail cannot establish an
¥
Add-On Conference Call.
General:
Some Voice Mail systems cannot leave a message indication.
¥
A call transferred from a Voice Mail port that is not answered in three
¥
minutes recalls to the Voice Mail port. No digits are sent.
When a station is programmed for Multiple Call Forward (e.g., 100
¥
CFWD – 101 CFWD – VM Hunt Group) and an internal call is made
to station 100, the caller receives the mailbox for station 100.
The ADA(2)-W(BK)/(SW) Unit, APR/APA-U Unit, and SLT(1)-U10
¥
ADP do not support Voice Mail Integration.
Set/cancel Voice Mail Message Waiting only from a Voice Mail port.
¥
When a call is complete, a disconnect signal is sent to the VM port.
¥
For connecting Voice Mail systems, refer to the applicable
¥
Engineering Technical Information (ETI) bulletins.
When required by locally provided Voice Mail systems, up to four
¥
digits can be sent before a station number to access a user mailbox.
The Large LED flashes red for message from Voice Mail or green for
¥
message from an Attendant.
This can be used for Centralized Voice Mail.
¥
Electra Elite
Voice Mail Integration (Analog)