NEC Electra Elite 48/192 Features And Specifications Manual page 417

Issue 6
L - 6
Use Memory Block 7-3-01 [MIF (LCR) Assignment] to enable the
¥
LCR function on the MIFM-U10 ETU with an installed KMM(1.0)U.
Trunk groups 2~32 are programmable in station class of service to
¥
bypass LCR at stations assigned for LCR.
Local Call Override of LCR is available in LCR Programming.
¥
The Priority Selection in the Route Advance Table is set using LCR
¥
Programming.
Restrictions:
Route Advance Blocks assigned on a line key bypass LCR.
¥
When the Electra Elite 48/192 system has KF registration, this
¥
feature is not available.
Outgoing calls using DISA cannot access LCR.
¥
General:
LCR is programmed using a Personal Computer and diskette through
¥
the MIFM-U10 ETU. This is the PC programming connection.
All Trunk groups in the system (except 00) can be accessed using
¥
LCR.
Trunk Group 1 Access Code (default: 9) activates LCR at stations
¥
assigned for LCR.
LCR is based on the first six digits (Area Code and Office Code)
¥
dialed.
When using Code Restriction with LCR, Code Restriction is applied
¥
to the digits dialed by the system.
Extra Code Tables can be programmed to provide OCC Access
¥
Codes and pauses for the distant-end system.
The maximum number of extra code digits is 32, including pauses
¥
(each pause counts as one digit).
LCR provides up to eight different routes for each call.
¥
When the station user seizes the most expensive trunk, alarm tone is
¥
not provided.
When the interdigit time exceeds 10 seconds, the outgoing call, using
¥
LCR, is disconnected.
When the station user places an outside call using LCR, Trunk
¥
Queuing cannot be set.
Electra Elite
Least Cost Routing (LCR)