Multiline Conference Bridge
FEATURE
DESCRIPTION
DESCRIPTION
SYSTEM
AVAILABILITY
SETUP
PROCEDURES
Features and Specifications Manual
Multiline Conference Bridge allows any intercom or outside caller to call the
CNF(8)-U10 ETU to place a multiparty conference call. Each CNF(8)-U10
ETU supports one 8-party conference or two 4-party conferences regulated by
a switch setting.
Two CNF(8)-U10 ETUs may be installed.
amplification provides a higher quality conference call. This new feature can
be used with any version of software on the Electra Elite 48- or 192-port
system.
Terminal Type:
All Multiline Terminals
Required Components:
CNF(8)-U10 ETU
To set the Supervisor Password:
1.
Call the Conference Bridge extension number, and wait for the voice
prompt.
2.
Dial the default Supervisor Password (
L
.
3.
Follow the voice prompt, and enter the setting verification mode
L
(
) . Then enter system set mode.
4.
Follow the voice prompt to change Supervisor Password (4~8 digits).
M-4
DSP based
K K K K
) , then dial
M - 7