NEC Electra Elite 48/192 Features And Specifications Manual page 209

Issue 6
SERVICE
CONDITIONS
C - 90
To cancel a message at a Multiline Terminal:
T
1. Press .
G I
2. Dial
T
3. Press
Data Assignment:
Use Memory
¥
Assignment) to program a maximum of 10 messages.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK1 to Allow (default: LED On) or Deny (LED Off)
DND.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 2 LK1 to Allow (default: LED On) or Deny (LED Off)
the Absence Message.
Restrictions
DND must be set to display the message.
¥
A maximum of 13 characters and the return time can be set for each
¥
message.
General:
Six messages are provided in default. All 10 can be programmed.
¥
Default messages are as follows:
¥
• DO NOT DISTURB
• MEETING
• BUSINESS TRIP
• NOT IN
• WITH GUEST
• OUT OF OFFICE
The message remains on the LCD where the message was set.
¥
When this feature is set, the Feature LED flashes.
¥
When calling a station in Do Not Disturb mode, a message displays
¥
on the caller terminal. Three seconds later, the return date and time
are displayed.
.
.
Block 1-2-9~18 (Customized
Electra Elite
Message 1~10
Customized Message