NEC Electra Elite 48/192 Features And Specifications Manual page 593

Issue 6
SERVICE
CONDITIONS
T - 12
Using a Single Line Telephone when all outside lines are busy:
1. Dial the Access Code for outside line.
2. Wait for busy tone.
3. Dial the Trunk Queuing Access Code (default:
4. Restore the handset.
Using a Multiline Terminal or a Single Line Telephone when an
outside line becomes available:
1. Receive internal ringing tone.
2. Lift the handset or press
3. Wait for the outside dial tone.
4. Dial the desired number.
To cancel this feature using a Multiline Terminal or a Single Line
Telephone:
1. Lift the handset or press
2. Wait for internal dial tone.
3. Dial the Trunk Queuing Cancel Access Code (default:
4. Restore the handset.
Data Assignment:
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK 2 to Allow (default: LED On) or Deny (LED
Off) this feature for each Class of Service.
Use Memory Block 1-1-37 (Trunk Queuing Timeout Selection) to
¥
specify the time (default: 10 sec.) a station with Trunk Queue set
rings before it is automatically canceled.
Restrictions:
Trunk Queuing cannot be set on an outgoing restricted line. When
¥
tried, reorder tone is provided.
P
.
P
.
Electra Elite
G H
) .
G I
) .
Trunk Queuing