Connectors And Cables; Table 5 Designations For Additional Ethernet Ports (Slot 1) - Nokia IP500 Series Installation Manual

5
Interface Card Reference Information
NIC is placed in slot 1. These designations differ from those for built-in
Ethernet interfaces.

Table 5 Designations for Additional Ethernet Ports (Slot 1)

Port Location
Port
Designation

Connectors and Cables

The interface between a NIC receptacle and an Ethernet cable is RJ-45.
To connect to a 10-Mbps or 100-Mbps hub, use a straight-through RJ-45
cable.
In Figure
with the copper pins facing up and toward you.
58
All manuals and user guides at all-guides.com
1 (left) 2
eth-s1p1 eth-s1p2
14, the RJ-45 cable output connector is numbered from right to left,
3 4 (right)
eth-s1p3 eth-s1p4
IP500 Series Installation Guide