Using The Dhcp Client To Configure The Appliance; Configuring The Dhcp Server - Nokia IP500 Series Installation Manual

If you do not want to change any of the information you entered, type Y when
prompted. This returns you to the menu in Step 4. Type 4 on this menu, to
leave system startup.
Using the DHCP Client to Configure the
Appliance
You can use the built-in Dynamic Host Configuration Protocol (DHCP) client
to configure the system instead of using a console connection. This feature
allows a properly configured DHCP server to provide your IP system with:
A host name
An IP address
A default route
You can then use Voyager to reconfigure any of these settings. Once you do
so, Voyager keeps the modified settings. (DHCP is not used if there is existing
configuration information.)
The DHCP server automatically sets the administrative password of the IP
system to password.

Configuring the DHCP Server

You must first configure a DHCP server with (at a minimum):
Mappings for a host name for the IP system
Serial number of the system, or the static MAC address of a NIC installed
in the system
The minimum IP address lease required is one year.
IP500 Series Installation Guide
All manuals and user guides at all-guides.com

Using the DHCP Client to Configure the Appliance

39