V.35 And X.21 Serial Nic Specifications - Nokia IP500 Series Installation Manual

5
Interface Card Reference Information
The following figure shows pin connections for this cable.
The RJ-48 cable is numbered from right to left, with the copper tabs facing up
and toward you.

V.35 and X.21 Serial NIC Specifications

The IP500 Series appliance supports selected V.35 and X.21 serial NICs,
which have the following features:
Line speed to full T1 and E1
Tracing through
Conforms with RFC 1661 (PPP), 1662 (PPP in HDLC-like framing),
1332 (PPP-IPCP), 1490 (frame relay), and Cisco HDLC
When you specify a serial NIC as part of the appliance, the board is installed
before the appliance is delivered. To connect to a V.35 or X.21 device, use the
appropriate adapter cable which must be ordered separately.
Note
You can find the type of interface (V.35 or X.21) on the connector on the
component side of the NIC.
70
All manuals and user guides at all-guides.com
tcpdump
IP500 Series Installation Guide