Upgrading The Boot Manager - Nokia IP500 Series Installation Manual

Upgrading the Boot Manager

The command to upgrade the boot manager has the following form:
upgrade_bootmgr boot-device boot-file
where boot-device is the storage device from which the boot manager loads at
boot up and boot-file is the new boot-manager image. The new boot manager
options are
the
upgrade_bootmgr
the boot manager.
Note
See the appropriate version of release notes for complete upgrade
procedures.
Note
To upgrade the new boot manager, you must be in single-user mode.
To upgrade the boot manager
1. Obtain the upgraded boot-manager image from the appropriate Nokia
customer support site as listed in the Nokia Contact Information section at
the front of this guide.
2. Start the IP500 Series appliance in single-user mode.
3. At the IPSO command prompt, enter:
/etc/upgrade_bootmgr wd1 /etc/nkipflash
The command upgrades the boot manager with the new image
(
nkipflash
some time to complete. Do not interrupt the upgrade process.
IP500 Series Installation Guide
All manuals and user guides at all-guides.com
cpipflash, cpvpnflash, nkipflash
command from IPSO (the operating system), not from
), writing it into the flash device (
Upgrading the Boot Manager
, and . Execute
nkvpnflash
). The upgrade takes
wd1
113