2
Installing the IP500 Series Appliance
Figure 6 Ethernet Interfaces
The first port (at the extreme left) is port 1. The next is port 2, and so on.
Chapter 3, "Configuring the Appliance,"
network connection.
You need this information to configure the connection.
Table 4 Designations of Built-In Ethernet Ports
Port Location
Port
Designation
Connect the appliance to a LAN by using one of the integrated Ethernet
interfaces. For a 10-Mbps or 100-Mbps hub, use a straight-through RJ-45
cable. To connect the appliance directly to a host, use an Ethernet crossover
cable.
To configure the network connection, continue to
Appliance."
32
All manuals and user guides at all-guides.com
Port 1
Link LED Activity LED
Table 4
shows the designation, or name, of each port.
1 (left)
2
eth1
eth2
Port 4
describes how to configure the
3
eth3
Chapter 3, "Configuring the
IP500 Series Installation Guide
00080
4 (right)
eth4