Completing the Configuration
To complete the configuration, follow these procedures:
1. Open a Web browser on the host computer or the system you will use to
complete the configuration or continue by using Lynx.
2. In the location or address field, enter the IP address of the interface you
configured in
by following on-screen instructions.
3. When prompted, enter the admin username you entered in
Hostname"
Voyager automatically starts.
4. Use Voyager to complete the configuration. In Voyager, click the Doc
button to access the Voyager Reference Guide and the Help button to
access Voyager inline help.
Using Voyager to Monitor an IP500 Series Appliance
After you install and configure your IP500 Series appliance, you can use
Voyager to monitor its operation.
To use Voyager to monitor the operation of the appliance, click Monitor from
the Voyager home page to access the monitoring functions.
IP500 Series Installation Guide
All manuals and user guides at all-guides.com
"Entering Initial Interface Information."
and the password you entered in
Configuring Routing and Applications
Activate the entry
"Entering the
"Establishing a Password."
45