Gigabit Ethernet Nic Specifications - Nokia IP500 Series Installation Manual

5
Interface Card Reference Information
Note
After you turn on the appliance, the Ethernet link LEDs on both the
appliance and on the remote equipment glow to indicate the connection.
As data is transmitted, the activity LEDs on the appliance glow.

Gigabit Ethernet NIC Specifications

The IP500 Series appliance supports both single-port and a dual-port Gigabit
Ethernet NICs, which provide the following features:
High bandwidth
Operation at 32 bit, 33 Mhz
Full-duplex mode operation up to 1 Gbps (no half-duplex support)
Hardware- and software-based auto negotiation
Tracing through
Compliance with PCI Industrial Computer Manufacturers Group
(PICMG) cPCI specification v2
Compliance with IEEE 802.3z Gigabit Ethernet specifications
You can configure and monitor Gigabit Ethernet NICs with Voyager, the Web-
based configuration and monitoring application. For information about how to
access Voyager and locate relevant reference materials, see
Network Interfaces with Voyager"
Figure 16
60
All manuals and user guides at all-guides.com
tcpdump
shows the front panel of a single-port Gigabit Ethernet NIC.
on page 41.
IP500 Series Installation Guide
"Configuring