Nokia IP500 Series Installation Manual page 90

6
Installing and Replacing Other Components
9. Replace the cover.
Make sure that the four pins on the left and right of the cover fit into the
corresponding lips on the left and right of the chassis. Once they do, you
can push the cover toward the front of the chassis until it locks into place.
10. Insert and tighten the screws on the left and the right of the cover but not
the middle screw.
11. Replace the power supply unit and the fan unit.
12. Insert and tighten the middle screw.
13. Reconnect the power cord.
14. Turn on the power.
The appliance automatically recognizes the new memory configuration.
You can verify this by using Voyager or Lynx to view the main page for
the appliance.
90
All manuals and user guides at all-guides.com
00121h
IP500 Series Installation Guide