6
Installing and Replacing Other Components
4. Remove the power supply unit and fan unit from the rear of the appliance.
5. Slide the cover toward the back and lift the cover from the appliance.
Sliding the cover back might require some force.
Attaching the Accelerator Card to the Motherboard
The PMC connectors are located at the left of the motherboard, looking at the
appliance from the front. Four standoffs (small tubes or risers) protrude
upward from the motherboard. These components are shown in part A of
Figure
Figure 33 PMC Connector Locations
Standoffs.
96
All manuals and user guides at all-guides.com
33.
A
B
Insert the VPN card
into connectors.
Screw card into standoffs.
IP500 Series Installation Guide
00140