Table of Contents
Advertisement
MPLS and RSVP-TE
3.11 PCEP Support for RSVP-TE LSPs
The Path Computation Element Communication Protocol (PCEP) is one of several
protocols used for communication between a wide area network (WAN) software-
defined network (SDN) controller and network elements.
The 7705 SAR operates as a PCE Client (PCC) only, supporting PCC capabilities for
RSVP-TE LSPs.
The following MPLS-level and LSP-level CLI commands are used to configure
RSVP-TE LSPs in a router acting as a PCC. See
Reference
section in the
88
for command descriptions. See the
PCEP
chapter for information on using these commands.
• config>router>mpls>
pce-report rsvp-te {enable | disable}
• config>router>mpls>lsp>
path-profile profile-id [path-group group-id]
pce-computation
pce-control
pce-report {enable | disable | inherit}
• config>router>mpls>lsp-template>
pce-report {enable | disable | inherit}
Use subject to Terms available at: www.nokia.com
PCEP Support for RSVP-TE LSPs
© 2022 Nokia.
MPLS and RSVP-TE Command
3HE 18686 AAAB TQZZA
MPLS Guide
Advertisement
Table of Contents
