Table of Contents
Advertisement
MPLS and RSVP-TE
lsp-egress-stats
Syntax
lsp-egress-stats lsp lsp-name [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>mpls
Description
This command monitors MPLS LSP egress statistics at the configured interval until the
configured count is reached.
Default
no lsp-egress-stats
Parameters
lsp-name — the LSP name
seconds — configures the interval for each display in seconds
repeat — configures how many times the command is repeated
absolute — displays raw statistics, without processing. No calculations are performed
rate — displays the rate per second for each statistic instead of the delta
Output
The following output is an example of LSP egress statistical information.
Output Example
===============================================================================
Monitor ingress statistics for MPLS LSP "toNodeA_1"
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
LSP Name
Sender
-------------------------------------------------------------------------------
Collect Stats : Disabled
Adm State
FC BE
InProf Pkts
InProf Octets : 0
FC L2
InProf Pkts
InProf Octets : 0
FC AF
InProf Pkts
InProf Octets : 0
FC L1
InProf Pkts
InProf Octets : 0
290
Values
3 to 60
Default
10
Values
1 to 999
Default
10
on the delta or rate statistics.
: toNodeA_1
: 10.10.10.29
: Up
: 0
: 0
: 0
: 0
Use subject to Terms available at: www.nokia.com
Accting Plcy. : None
PSB Match
OutProf Pkts
OutProf Octets: 0
OutProf Pkts
OutProf Octets: 0
OutProf Pkts
OutProf Octets: 0
OutProf Pkts
OutProf Octets: 0
© 2022 Nokia.
MPLS Guide
: True
: 0
: 0
: 0
: 0
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
