Nokia 7705 SAR-W Series Manual page 177

MPLS Guide
3.24.2.1.3
ingress-statistics
Syntax ingress-statistics
Context config>router>mpls
Description This command enters the context to configure LSP ingress statistics.
Default n/a
lsp
Syntax [no] lsp lsp-name sender ip-address
Context config>router>mpls>ingress-statistics
Description This command configures statistics in the ingress data path of a terminating RSVP LSP at an
egress LER. The LSP name must correspond to the name configured by the user at the
ingress LER. It must not contain a colon (:), which is used as a field separator by the ingress
LER for encoding the LSP and path names into the RSVP Session Name field in the
Session_Attribute object. The user must also execute the no shutdown command in this
context to enable statistics collection.
The no form of this command disables statistics for this RSVP LSP in the ingress data path
and removes the accounting policy association from the LSP.
Default n/a
Parameters lsp-name — the LSP name as configured at the ingress LER, up to 32 characters in
ip-address — the IP address of the ingress LER for the LSP
accounting-policy
Syntax accounting-policy policy-id
no accounting-policy
Context config>router>mpls>ingr-stats>lsp
config>router>mpls>lsp>egress-statistics
Description This command associates an accounting policy with an RSVP LSP. Only one accounting
policy at a time can be associated with an RSVP LSP on a particular node.
3HE 18686 AAAB TQZZA
RSVP LSP Statistics Commands
length
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
177